WARNING!
If the battery voltage falls below 21 Volts, as indicated by 20% in the goggles, it will cause irreparable damage to the BMS board.
Notice: Unfortunately, we do not provide refunds or replacements for damaged BMS boards.
The assembly includes the following parts:
- (1) 3D Printed Battery Cage (Free!)
- (1) 3D Printed Center wall
- (1) 3D Printed Center Board Case
- (4) M2 Stainless screws and nuts
- (1) Break out board (AircruiserFPV)
- (1) DJI Battery Management board
- (1) 1 XT60 socket and harness
- (1) Balancing lead socket and harness
NOT included.
BATTERY
Purchase here:
or here:
WARNING!
If the battery voltage falls below 21 volts, it will cause irreparable damage to the BMS board.
This cannot be reversed or repaired!
Please ensure you download the
Quickstart Guide below:
Find out how I build my drones, step by step:
Princes Drone Photography
Instructions videos
Princes FPV Drones
Become part of this expanding community:
Discord
Follow me on Instagram:
dronephotographystudio
Follow me on Twitter:
@PrincesDrone
Questions? See if they have been answered
If you have any feedback or questions, please email me below
Email: princes@dronephotographystudio.com