DJI FPV battery modification Extension-3D Printed

The DJI FPV battery modification extension enables pilots to use longer batteries while effectively powering the drone. This allows for the use of a non-standard longer 6s LiPo batteries. Applications include research and development, tracking flight time in relation to battery capacity, and much more!

Included:

(1) 3D Printed

Extension Battery Cage

(1) Rear Cover

(1) Top Plate –

with brass boss for securing to

(8) M2 self tapping Screws – 2 extra

(4) M1 Philips Stainless screws – 2 extra

NOT included.

Battery Management board

Extension hookup cable assembly

Battery

You will need the following items:

(1) BMS board

(1) Donor BMS board – for plug only

(1) ESC to remove the socket from New Original OEM DJI FPV Drone ESC Power Board Replacement Part – BC.MA.SS00021

(1) Any 6s battery can be used, provided it fits within the case dimensions: width must not exceed 36mm, height must not exceed 37mm, and length must not exceed 95mm.

Note: Custom lengths are available upon request.

WARNING!

If the battery voltage falls below 21 volts, it will result in irreparable damage to the BMS board!