The DJI FPV Drone Battery Charger is a specialized adapter created for upgrading the DJI FPV Drone battery. This charger incorporates the original BMS board from the DJI FPV battery and features a case designed for seamless connection to any 6s LiPo battery for charging.

It has been tested with capacities ranging from 1400mAh to 5000mAh and delivers flawless performance.

Both the XT60 connector and the balance leads connect seamlessly to the charger’s receptacles.

The power supply is the

DJI FPV Drone Battery Charger AC Power Adapter

The DJI FPV AC Power Adapter is a universal charger (100-240V input) that outputs up to 90 Watts of peak, charging the FPV battery at high/low current (25.2V) and offering two 5V/2A USB ports for the remote/goggles simultaneously, designed for fast charging the FPV system’s components.

Battery Output:
High Current: 25.2 Volts, 3.57 Amps
Low Current: 25.2 Volts, 1 amps

Testing showed that A 1400 mAh battery will charge in approximately 30 minutes from 34 percent using this charger.

A 5000 mAh (5 Amp-hour) battery charged in approximately 1 hour and 30 minutes from 34 percent using this charger.

The batteries felt cool to the touch, while the charger box was also cold, and the AC adapter was only slightly warm.

Just plug in the battery, turn on the charger, and let it charge it’s as simple as that.

Purchase from below

Note: Refunds are not permitted

Included:

(1) Charger assembly

(1) 3D Printed body

(1) BMS board

(1) Wiring harness

(1) Top Plate

(1) Button

(5) M2 Self tapping Screws

NOT included.

DJI FPV AC Power Adapter

Battery to be charged